Vertical Design
Uncoated Pump
Without Mechanical Seal
Maintenance at site
Lower Ownership Cost
Particulars | Unit | DP300/DP300S |
---|---|---|
Description/Frequency/Phase | Hz | 50 |
Orientation | - | Vertical |
No. of stages | - | 4 |
Construction | - | 1root+3claw |
Maximum pumping speed | m3/h | 300 |
Ultimate pressure(total pressure) | mbar | 0.05 |
Motor power | kW | 11 |
Weight | kg | 565 |
Noise level** | dB(A) | 78 |
Inlet connection | - | ISO63 |
Exhaust connection | - | KF50 |
Gearbox oil capacity | L | 3.5 |
Recommended oil(supplied) | - | ISOVG 150 |
Cooling system type | - | Direct water-cooling |
cooling-water flow | l/min | 5 to 10 |
Supply temperature range | deg. C | 5 to 35 |
Cooling-water supply pressure | bar G | 2 to 10 |
Shaft-seals air/nitrogen purge | - | Yes |
Pressure relief valve | - | Yes |
Overall dimensions(Length x Width x Height) | mm | 850x730x1614 |
Capacity @ 1torr : 300m3/hr
Capacity @0.1 torr : 100m3/hr
Ultimate Vacuum- Pump with booster : 0.005 mbar
Pump with Booster : 1000 m3/hr @ 0.1 torr
Pump with 2 Boosters : 2000 m3/hr @ 0.1 torr
Stators : Spheroidal Graphite Iron SG 450-10 IS:1865 (Ductile Iron / Nodular Iron)
Rotors- Claw and Lobe : Spheroidal Graphite Iron SG 450-10 IS:1865 (Ductile Iron / Nodular Iron)
Shafts : Medium Carbon steel (45C8)
Shaft seal : PTFE Lip Seal
O-rings : FKM (Viton)
Chemical
Pharmaceuticals
Food
Medical
Electrical and Power
Distillation
Drying
Filtration
Solvent Recovery
Centralized Vacuum System – Pharmaceutical Laboratories
Freeze Drying
Short Path Distillation
Steam Sterilization
© HIS Pumps 2024. All Rights Reserved. | Designed & Developed by : Webyou Technologies