Dry Vacuum System

Dry Vacuum System

  • Vertical Design

  • Uncoated Pump

  • Without Mechanical Seal

  • Maintenance at site

  • Lower Ownership Cost

Particulars Unit DP300/DP300S
Description/Frequency/Phase Hz 50
Orientation - Vertical
No. of stages - 4
Construction - 1root+3claw
Maximum pumping speed m3/h 300
Ultimate pressure(total pressure) mbar 0.05
Motor power kW 11
Weight kg 565
Noise level** dB(A) 78
Inlet connection - ISO63
Exhaust connection - KF50
Gearbox oil capacity L 3.5
Recommended oil(supplied) - ISOVG 150
Cooling system type - Direct water-cooling
cooling-water flow l/min 5 to 10
Supply temperature range deg. C 5 to 35
Cooling-water supply pressure bar G 2 to 10
Shaft-seals air/nitrogen purge - Yes
Pressure relief valve - Yes
Overall dimensions(Length x Width x Height) mm 850x730x1614
  • Capacity @ 1torr : 300m3/hr

  • Capacity @0.1 torr: 100m3/hr

  • Ultimate Vacuum- Pump with booster: 0.005 mbar

  • Pump with Booster : 1000 m3/hr @ 0.1 torr

  • Pump with 2 Boosters : 2000 m3/hr @ 0.1 torr

  • Stators : Spheroidal Graphite Iron SG 450-10 IS:1865 (Ductile Iron / Nodular Iron)

  • Rotors- Claw and Lobe : Spheroidal Graphite Iron SG 450-10 IS:1865 (Ductile Iron / Nodular Iron)

  • Shafts: Medium Carbon steel (45C8)

  • Shaft seal: PTFE Lip Seal

  • O-rings: FKM (Viton)

  • Chemical

  • Pharmaceuticals

  • Food

  • Medical

  • Electrical and Power

  • Distillation

  • Drying

  • Filtration

  • Solvent Recovery

  • Centralized Vacuum System – Pharmaceutical Laboratories

  • Freeze Drying

  • Short Path Distillation

  • Steam Sterilization

© HIS Pumps. 2022 | All Rights Reserved.